The RV2P800 is a Pentode designed for use in battery powered radio receiving sets. Voltage requirements are 2 Volts-2 Amps for the filament, and 90 volts-200 milliAmps for the Anode (plate) voltage. These vacuum tubes are very sensitive especially to filament voltage variations and extreme care should be taken when repairing a device where these tubes are used. There is currently no substitute for these tubes. If anyone knows of a substitute, please contact us.
Photo showing date of manufacture and Waffenamt stamp.



Photo showing tube name and inscription "property of the Wehrmacht"



The bottom of the tube showing the control grid terminus.



The manufacturer's name and logo on the top of the tube handle.



The pinout diagram of the RV2P800